Warning: This module may not support sharing across sites


You are attempting to add a reference to this module that exists on another site in this group. This module may or may not support sharing across multiple sites - it doesn't explicitly state either way whether it does.

If you are sure that it does, or if your intent is to test its ability to do so, then proceed with caution and be aware that certain functionality in the module - or even the entire module - may not function correctly in this configuration.

If you are confused by this message or are working on a site that cannot tolerate any breakage, you should click Cancel and contact the DotNetNuke Support Team.


举报方式

 

收信地址: 四川省成都市武侯区人民南路四段30号中蓝晨光化工研究设计院有限公司纪委办公室     邮编:610041
举报邮箱:cgxfjb@sinochem.com
举报电话:
高建新:028-85555041、13550116432
段  蓉:028-85590219、18108086068

高弹性模压硅橡胶

来源: 蓝星中蓝晨光化工研究设计院
时间:2013-11-14

特点

高弹性、低压缩变形;

耐高低温、耐气候老化;

优异的电绝缘性能;

良好的物理机械性能;

典型应用

适用于模压制品和压铸制品,如垫片、垫圈、O形圈、膜片、胶辊、板材等。

典型性能

项目

单位

数值

GX231-U

GX241-U

GX251-U

GX261-U

GX271-U

密度(25℃)

g/cm3

1.09

1.12

1.15

1.18

1.21

外观

乳白色,半透明,无明显机械杂质

拉伸强度

MPa≥

6.0

6.5

8.0

7.5

7.5

扯断伸长率

%≥

450

300

300

280

220

扯断永久变形

%≤

4.0

4.0

4.0

4.0

5.0

撕裂强度

KN/m≥

18.0

20.0

22.0

20.0

18.0

硬度

HA

30±3

40±3

50±3

60±3

60±3

使用方法

将胶料在开炼机上加入过氧化物硫化剂——双二五,返炼均匀后即可用于模压成型,模压工艺条件应根据制品的规格、形状大小确定。在开炼机上加入硫化剂前,可根据需要加入各种颜料,以配制成需要的颜色,但应注意颜料加入后需薄通均匀,最好是加入颜料膏。

根据客户需求,出厂时可加入硫化剂,也可配制成客户需求的颜色。

商务垂询
电话号码:028-85556475
 
 
 
联系我们 | 网站地图 | 法律声明 | 投诉与问卷 | RSS订阅 | 常见问题
Copyright © 2005-2022 中蓝晨光化工研究设计院有限公司 版权所有 未经允许请勿转载 蜀ICP备09005545号